beam blank
英 [biːm blæŋk]
美 [biːm blæŋk]
网络 异型坯; 电子束光闸系统; 异形坯
双语例句
- COUPLED SIMULATION ON FLOWING AND SOLIDIFYING OF STEEL IN THE BEAM BLANK MOULD Influence of Coating on the Surface Recrystallization of Directionally Solidified Superalloy
异型坯结晶器内钢水流动和凝固过程的耦合数值模拟涂层对定向凝固高温合金表面再结晶的影响研究 - Reduction on inclusion content in beam blank and reject ratio of large-size angle section
降低铸坯夹杂物含量减少大规格角钢废品 - Simulation Study and Industrial Practice of Double SENs in Beam Blank Mold
异型坯连铸双浸入式水口浇铸技术模拟研究及工业实践 - A super-flat shaped submerged entry nozzle ( SEN) was developed for Laigang Beam blank Caster to achieve full protection casting.
针对莱钢异型坯连铸机实现全保护浇注的要求，开发了一种超扁平形状的浸入式水口。 - Based on the beam blank mould of Ma Steel, the physical model was set up under different nozzle designs and technical parameters.
针对马钢异型坯结晶器特点，在不同水口参数和工艺条件下，建立了相应的物理模型。 - The plumB line is always perpendicular to the horizontal plane. Simulation Study and Industrial Practice of Double SENs in Beam Blank Mold
铅垂线总是垂直于水平面的。异型坯连铸双浸入式水口浇铸技术模拟研究及工业实践 - Through the optimization of second cooling technology, the uniformity of the secondary cooling is improved, and the surface quality and the internal quality of beam blank are greatly improved.
通过二冷工艺的优化，提高了二次冷却的均匀性，铸坯表面和内部质量大幅度提高。 - Optimization on Mould Powder of Weathering Steel Beam Blank Continuous Casting
耐候钢异型坯连铸结晶器保护渣性能优化研究 - Effect of Nozzle Outlet Angle on Fluid Flow and Level Fluctuation in a Beam Blank Casting Mould
水口倾孔倾角对异型坯结晶器流场和液面波动的影响 - The Control System of the Beam blank Caster of Laiwu Steel Group
莱钢异型坯连铸机控制系统的研究与应用 - Based on the underground of high efficient CC in Ma'steel, the longitudinal surface crack and centerline crack, the uppermost defects of beam blank CC production are studied.
针对马钢异型坯高效连铸的背景，分析了异型坯生产中铸坯质量的主要缺陷类型：表面纵裂和中心裂纹。 - Analysis of Beam Blank Defects and Optimum Control for High Efficient Continuous Casting
高效连铸下的异型坯质量缺陷分析及优化控制策略 - Development and Application of Process Technique for Beam Blank Casting Tundish
异形坯连铸中间包工艺技术的开发与应用 - Studied the reason and the countermeasure of longitudinal surface crack of Ma-Steel beam blank.
研究了马钢连铸异型坯表面纵裂纹的成因和对应措施。 - Technics Study of Reducing Longitudinal Surface Crack of Beam Blank
减少连铸异型坯表面纵裂纹的工艺研究 - There were longitudinal surface cracks on Masteel beam blank, and they are the reason of defects after rolling.
马钢连铸异型坯存在表面纵裂纹，是造成轧后废品的主要原因。 - Simulation on Fluid Flow and Solidification Coupled Analysis in Beam Blank Continuous Casting Mould
异型坯连铸结晶器内流动与凝固耦合数值模拟研究 - Discussion on center-line cracks in conventional slab and web of beam blank
连铸板坯和连铸异型坯腹板中心内裂形成原因的探讨 - Hydraulic model study on optimization of nozzle for beam blank continuous casting mould
异型坯连铸结晶器水口优化的水模研究 - Study on Feeding Rare Earth Wire in Mould of Beam Blank
异型坯结晶器喂稀土丝试验研究 - After analyzing the problems of Beam Blank Caster Dummy Bar Storage device raised during production operation and solving them, economic profits are made.
对异型坯连铸机引锭杆存放装置在生产运行中存在的问题，进行了分析，提出了相应的解决方案，取得了显著的经济效益。 - This paper describes the study on the flow field in the beam blank mould by means of the hydraulic experiment.
采用水力学试验的方法，对异型坯结晶器内的流场进行研究。 - This paper analyzes the effects of Mn/ S, S and P contents, casting speed and secondary cooling on centreline crack in the web of beam blank, and puts forward the improving measure.
通过现场调研和工艺参数统计，分析Mn/S、S、P、拉速和连铸二冷设备等对异型坯腹板中心裂纹的影响，在此基础上提出改进建议。 - Using water model, the flowing distributions based on the different SEN structures and technological parameters in beam blank mould are studied in this paper.
通过水力学模型实验，在不同水口结构和不同工艺参数的条件下对异型坯进行结晶器流场对比。 - The flow path in beam blank mould was calculated using computational fluid dynamics package ( CFX4). The flowing regularity of hot metal in the complicate shape of beam blank mould was revealed.
利用CFX4计算流体软件对异型坯结晶器内流场进行了数值计算，初步揭示了钢水在异型坯结晶器复杂形状熔池内的流动规律。 - Simulation Research on relation of crack and stress in mould for beam blank continuous casting
结晶器内异型坯应力与裂纹关系数模研究 - For shape of CC beam blank is complex, there are more rate of longitudinal crack on the surface.
连铸异型坯由于其形状复杂，表面纵裂纹发生率较高。 - Study on Reduction of Beam Blank Cracking
减少异型坯裂纹的工艺研究 - For rolling H-shaped steel used beam blank can reduce rolling pass, reducing energy consumption and investment, construction costs, and can significantly increase productivity.
异型坯用于轧制H型钢不但可以减少轧制道次，降低能耗和投资建设成本，而且可以大幅提高生产效率。